The CB3B is the highest performance carbon block
cartridge on the market today. It is used in OMNI Undersink filters CBF3,
OT32, and OB3.
The CB3's carbon block removes chlorine and odors, harmful bacteria like Giardia
and Cryptosporidium, lead, and volatile organic compounds (VOCs) like Atrazine
(a herbicide) and Lindane (a pesticide), as well as 32 other VOCs, to give you
great tasting, safe drinking water right from the tap, or from a dedicated
faucet, depending on the unit selected.
Need Help? Please call our customer service number:
(855) 855-1976 for assistance.
ALSO NOTE: The New CB3B - V2.87 is larger than the old CB3A
- V2.72
Our Alternate CB3A - V2.72 Cartridge has a slightly smaller diameter than the new CB3B
and it will fit your older OT32 and the other older OmniFilter Units. Order
the Alternate Smaller CB3A - V2.72 here - if you have an older unit.
CB3B
Choose Size
Replacement
Cartridges
CB3B Pricing QTY 1 at $39.94 each
QTY 2-5 at $37.04 each
QTY 6+ at $33.15 each
Reduces lead, Cryptosporidium
and Giardia cysts, and 34 VOCs at 97% or better.
Also removes chlorine and odors to give you great tasting
water.
Average
Cartridge Life1
400
gal
Flow
Rate2
0.5 gpm
Micron
Rating3
0.5
1 Usage
and the quality of water in your incoming line determine
when your cartridge should be changed. 2 Gallons per minute. 3 The smaller the micron, the finer the
filtration.
If you have an
older Omni filter model that has been discontinued and need an O-Ring,
please call our customer service number: (855) 855-1976 for
assistance.
The CB3 filter cartridge replaces the
TC3 or TC 3 filter cartridge.
NOTE: as
of 2008, the design of the CB3 has changed again. The CB3 will now
be open at both ends. Another major difference is that this newer
version will last longer (up to 6 months).
NOTE: as
of 2014, the design of the CB3 has changed again. The CB3 will not
fit in some older units.
If you receive a new model
and you are unable to close the top of your housing,
please remove the o-ring(s) from the new filter and use the ones from
the old filter, as the new ones may be thicker. This should allow you to
close the lid on the housing. If the new CB3 is too large to fit
in your unit, exchange for a smaller cartridge.
